2008-2015 Audi TT Quattro Coupe S-Line Front Seats / Black Nappa Leather / Pair / T2012
$600.00
2008-2015 Audi TT Quattro Coupe S-Line Front Seats / Black Nappa Leather / Pair / T2012
All seat controls and functions were able to be fully tested prior to removal from the vehicle. These seats have 10 way power controls, 4 way driver lumbar, and internal seat heaters.
Physical Condition:
Includes both the driver and passenger side front seat assemblies. In good physical condition, have not been hit or bent in any way. You will need to reuse some existing hardware for installation. The leather bolsters are in good condition as well with no major rips or tears in the material. Stitching is fully intact with no visible fraying or separation. The lower bolsters have some visible crease marks and wrinkling from normal use. Both seats have the S Line logo imprinted into the leather as shown.
2008-2015 Audi TT Quattro Coupe S-Line Front Seats / Black Nappa Leather / Pair
Donor Car:
2008 Audi TT 3.2 Quattro Coupe – 101K
Functionality:
All seat controls and functions were able to be fully tested prior to removal from the vehicle. These seats have 10 way power controls, 4 way driver lumbar, and internal seat heaters.
Physical Condition:
Includes both the driver and passenger side front seat assemblies. In good physical condition, have not been hit or bent in any way. You will need to reuse some existing hardware for installation. The leather bolsters are in good condition as well with no major rips or tears in the material. Stitching is fully intact with no visible fraying or separation. The lower bolsters have some visible crease marks and wrinkling from normal use. Both seats have the S Line logo imprinted into the leather as shown.
Cosmetic Condition:
In typical used cosmetic condition with no major staining or discoloration in the leather. The lather side bolsters have some typical heavier cracking from use, as shown. The plastic trims have some light scuffs and scratches from use.
Fits:
2008, 2009 Audi TT 2.0T FWD Coupe (verify seat options)
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Audi TT Quattro Coupe (verify seat options)
2009, 2010, 2011, 2012, 2013, 2014, 2015 Audi TTS Quattro Coupe (verify seat options)
Fitment Notes:
Removed from a 2008 Audi TT S-Line Coupe that was equipped with the Black Nappa Leather interior, 10 way power seats with 4 way lumbar, and seat heaters. Please verify this seat set matches your vehicle’s current interior color prior to purchase. Will ONLY fit Coupe models.
We process every order quickly to ensure your Audi or Volkswagen parts are prepared for dispatch without unnecessary delays. Once your order is confirmed, our team carefully verifies the items and packages them securely to help prevent damage during transit.
Shipping & Delivery
We ship to customers worldwide using reliable courier services. Delivery times vary depending on your destination and shipping method selected at checkout. After your order has been dispatched, you will receive a tracking number so you can monitor its progress until it arrives at your address.
Secure Packaging
Every product is packed with care to protect it during transportation. If you have any questions about shipping, delivery times, or your order, please contact our customer support team at info@audiflagshipstore.com. We are committed to providing a smooth, reliable, and hassle-free shopping experience.
Related products
13-17 AUDI Q5/SQ5 – RS STYLE FRONT HONEYCOMB GRILL
2004-2006 Audi TT 3.2 Quattro Dual Tip Exhaust Muffler / Valved / OEM / T1021
2004-2006 Audi TT 3.2 Quattro Dual Tip Exhaust Muffler / Valved / OEM / T1021
2004-2006 Audi TT 3.2 Quattro Dual Tip Exhaust Muffler. In good physical condition for its age with only some typical light dings, as shown. In good cosmetic condition as well, with only some typical scuffs, scratches, and discoloration. The canister has some light discoloration as shown in the photos. The tips could use a polish prior to installation. This muffler has been cut off the vehicle for removal and does not have a bolt on flange, as shown in the photos. You will need to have this muffler welded on to your existing exhaust system. This exhaust has the valve actuator which was only found on the 3.2l models.
2008-2015 Audi TT Coupe Rear Trunk Parcel Shelf Luggage Privacy Cover / OEM / T2012
2008-2015 Audi TT Coupe Rear Trunk Parcel Shelf Luggage Privacy Cover / OEM / T2012
Includes only the single rear privacy cover trim panel, as shown. In good used physical condition with no major cracks or damage. Carpet material has no rips or tears. You will need to reuse your existing front cover and trim for installation.
Cosmetic Condition:
In good used cosmetic condition for its age. The top side of the panel has some light discoloration and sun fading from normal use, as shown. Free of any major stains or marks in the material. There may be some light signs of wear that may be difficult to see in photos.
3″ DPF Delete Downpipe – Audi A3/TT 2.0 TDI 2WD CR140 / CR170 / PD170 BHP
FITMENT AND SPECIFICATION
Steel 3" DPF Delete Downpipe for Audi A3/TT (8P) 2.0 TDI 2WD PD170 / CR140 / CR170 BHP.
This 3" downpipe is designed to be a direct replacement for the standard downpipe removing the Diesel particulate filter (DPF).
This downpipe fits the following engine codes. (Engine code can be found on your timing belt cover)
(CR140) CBAA / CFAA 136HP
(CR140) CBAB / CBDB / CFFB / CJAA / CBEA 140HP
(PD170) BMN 170HP
(CR170) CBBB / CFGB 170HP
Audi A4 / S4 B9 18- Inch OEM Alloy Wheels
Audi Q8 Complete Black Leather Interior Seat Set
CTS Turbo – 1.8T TURBO MANIFOLD T3 FLANGE (TRANSVERSE) – TT Mk1
CTS Turbo - 1.8T TURBO MANIFOLD T3 FLANGE (TRANSVERSE) - TT Mk1
The CTS Turbo Top mount exhaust manifold for the VW/Audi 1.8T 20V engine is designed for use with T3 flanged turbochargers and 38mm or 39mm wastegates. The top mount design allows for very easy installation into VW MK4, MK3, MK2, Audi TT225, TT180HP, S3, along with various Seat and Skoda 1.8T models, the semi-equal length design was used to optimize peak power and retain good spool characteristics. Our manifold is manufactured with the highest grade ductile iron, with high tolerance to extreme heat, cracking and warping.
Applications:
- Transversely mounted VW/Audi 1.8T
- Top Mount cast semi-equal length
- T3 flanged turbo manifold for use with 38 or 39mm external wastegate
CTS Turbo – 3″ Downpipe and High-Flow Cat – TT Mk1 FWD
CTS Turbo - 3" Downpipe and High-Flow Cat - TT Mk1 FWD
We are proud to release the new CTS Turbo 3″ Stainless Steel High-Flow Cat for the 1.8T. Unfortunately, the factory downpipe that comes as standard equipment in your car was designed for anything but performance. The factory downpipe severely restricts exhaust flow and therefor has adverse effects on horsepower, especially once your car is “chipped”. The CTS Turbo High-Flow Cat will allow for your exhaust gases to flow smoothly, freeing up the additional ponies that you want, all while look amazing. Highlights of our High-Flow Cat include CNC machined turbine discharge (downpipe) flange, mandrel bent 3″ stainless steel tubing, modular design making installation of a catalytic converter simple and straight forward, smooth transitions allowing for optimal exhaust gas flow.
Precision fabrication, unparalleled quality and great price point all make the CTS Turbo 1.8T High-Flow Cat a must-have for any VW enthusiast that values performance and their pocketbook.

Reviews
There are no reviews yet.